Bifold Door Installation

Guide · Homeowners · 4 min read · Updated 17 November 2026

How Much Do Bifold Doors Cost in the UK? 2026 Fitted Prices

Short answer

Three-panel uPVC bifold doors around 2.4 metres wide typically cost £2,500–£4,000 supplied and fitted in the UK in 2026, while aluminium bifolds of the same size cost £3,800–£6,000. A five-panel aluminium set around 4 metres costs £6,500–£10,000, and timber or aluminium-clad timber bifolds £5,000–£12,000. Widening the opening with a new steel beam adds £2,000–£5,000. Repairs start from £120.

How Much Do Bifold Doors Cost in the UK? 2026 Fitted Prices

Typical bifold door prices

Bifold doors are priced on four main things: how wide the opening is, how many panels it is split into, what the frames are made of and how the glass is specified. Fitting into an existing opening that is sound, square and already has a lintel is the cheapest route. Creating or widening an opening adds structural costs before the doors themselves are even ordered. The table shows typical 2026 guide prices, supplied and fitted with standard double glazing.

These figures include removing the old doors where there are any. They do not usually include internal decorating, new flooring up to the threshold or any patio work outside, which are often needed when a level threshold is chosen.

JobTypical 2026 priceNotes
uPVC bifold, three panels, around 2.4m£2,500–£4,000Existing opening, old doors removed
Aluminium bifold, three panels, around 2.4m£3,800–£6,000Thermally broken frames, standard colour
Aluminium bifold, five panels, around 4m£6,500–£10,000May need top-hung system and extra lifting
Timber or aluminium-clad timber bifold£5,000–£12,000Species, finish and panel count
Widening opening with new steel beam£2,000–£5,000Calculations, propping, steel, padstones, making good
Bifold repair and adjustmentfrom £120Rollers or glass units extra

Why material makes such a difference

uPVC bifolds are the most affordable. Their frames are reinforced internally with steel or aluminium, insulate well and are available in a range of colour foils. The compromise is frame thickness: uPVC needs chunkier profiles to stay rigid, so sightlines are wider and very large panels are not practical. They suit modest openings and tighter budgets.

Aluminium is the most popular material for bifolds because it is strong enough for slim frames and tall, wide panels. Modern systems use a thermal break, a strip of insulating material between the inner and outer aluminium, so the frames do not act as a cold bridge. Powder-coated finishes come in almost any colour, often with a different shade inside and out. Timber bifolds suit period homes and oak-framed buildings, and aluminium-clad timber combines a natural interior with a low-maintenance exterior.

Panel count, width and running gear

More panels mean more hinges, rollers, seals and locking points, so price rises with panel count as well as width. A three-panel set across a 2.4 metre opening is a common starting point. A five-panel set across around 4 metres can open almost the whole back of a kitchen extension, but each panel is large and heavy and the running gear has to carry it reliably for years.

Large or tall bifolds may use a top-hung system, where the weight is carried from the head track rather than the bottom, which places more demand on the beam above. The installer will want to know that the structure over the opening will not deflect, because even a few millimetres of sag can make panels bind.

  • Odd numbers of panels allow a traffic door that opens on its own.
  • Panels can fold to one side or split to both sides.
  • Fold outward to save room space, or inward where a patio is narrow.
  • Tall panels may need upgraded hardware and a stiffer beam.

Structural work and opening costs

If you are replacing a window and wall with bifolds, or widening a pair of French doors, the opening has to be formed or enlarged. That means structural calculations for a new steel beam or lintel, temporary propping of the wall above, cutting out the masonry, installing the steel on padstones and making good inside and out. Typical costs run at £2,000–£5,000 before the doors, plus Building Regulations fees.

Bifolds are precision products, and they are made to the measured size of the finished opening. It is normal for the installer to survey after the structural work is complete, so allow a gap between the builder finishing and the doors being fitted. Lead times for made-to-measure bifolds vary, so ask early.

Upgrades that add to the price

Glazing upgrades are the most common extras. Triple glazing improves insulation but adds weight. Solar control coatings help south and west-facing rooms that overheat in summer. Self-cleaning glass reduces how often you need to clean the outside of large panes. Integral blinds sit between the panes and avoid dust and cords.

Threshold choice also affects cost. A standard weathered threshold gives the best weather resistance. A low or flush threshold creates a level step-free route to the garden, but it needs careful drainage outside, often a slot drain or channel, and may mean raising the patio to meet it.

How to compare quotes fairly

Bifold quotes vary a lot, so line them up carefully. Check the system name and frame depth, the glass specification and its U-value, the number of panels and how they fold, the threshold type, the hardware and lock specification, and whether the doors are tested to a security standard such as PAS 24. Confirm whether the installer is registered with a competent person scheme so the work can be self-certified for Building Regulations.

Ask what is included in fitting: removal and disposal of the old doors, making good the reveals, internal trims and sealing outside. Ask about lead time and what happens if the opening is out of square when they arrive. The lowest price is only good value if it covers the same specification and the same scope.

Questions people also ask

Are aluminium bifold doors worth the extra cost over uPVC?

For larger openings, usually yes. Aluminium's strength allows slimmer frames, bigger panels and smoother running over many years, and powder-coated finishes last well. For a modest opening on a tighter budget, a good uPVC bifold performs well thermally and costs less, typically £2,500–£4,000 for three panels against £3,800–£6,000 for aluminium.

How long does it take to fit bifold doors?

Fitting into a prepared opening usually takes one to two days for a typical three to five-panel set, including removing old doors, fixing the frame, hanging and adjusting panels and finishing trims. The longest part of the process is often the manufacturing lead time after the final survey, which can run to several weeks.

Do bifold doors need a steel beam?

Only if the opening is being formed or widened, or if the existing lintel is not adequate for the new span. A structural engineer specifies the beam, and Building Control approval is needed. Fitting bifolds into an existing door opening with a sound lintel does not usually need new steel.

Written and checked by the Bifold Door Installation team. Read our editorial policy.

Get a free bifold door installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote